Linear MegaCode Block Coded Visor Access Control Transmitter, 1-Channel (MT-1B)

Description

The Linear MegaCode Block Coded Visor Transmitters are designed for use with Linear’s access control products. A visor clip is included.
The transmitters are MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.
Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
Transmitter Features
Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1,000,000 codes
Operate LED
Visor clip included
9-volt battery supplied
MegaCode format
RF frequency: 318 MHz
2.2" W x 3.8" H x 0.9" D
Technical Details
MPN:
MT-1B
UPC:
93863106552
Frequency:
318 MHz
Number of Codes:
1,000,000 plus ID codes
Code Set Method:
Factory programmed
Channels:
1-channel
Power:
one 9 V battery (supplied)
Dimensions:
2.2" W x 3.8" H x 0.9" D (56 x 97 x 23 mm)